43
CUSTOMIZING YOUR KEYSET
AME PASSWORD
This feature allows people using the AME (Answer Machine Emulation) fea-
ture to enable password protection. This will prevent unauthorized people
from listening to your messages being left. The passcode is the same as
your station passcode. This feature only applies if there is a Samsung Voice
Mail card installed in the system and your keyset has a programmed AME
key.
See the Keyset User Features in the SVMi-4/SVMi-8 section.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
101
to turn on AME PASSCODE or
100
to turn it off.
•
Press
TRANSFER
to store your selection.
AUTO CAMP-ON
[iDCS 500 L/LE VERSION ONLY]
This option allows intercom calls to be automatically camped on, if possible,
when a busy station is called.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Press
081
to turn CAMP-ON on or
080
to turn it off.
•
Press
TRANSFER
to store your selection.
SELECT RING TONE
Each keyset user can select any one of eight ring frequencies:
•
While on-hook, press
TRANSFER
and then dial
111
.
•
Dial
1
–
8
or press the
UP
and
DOWN
keys to hear each tone.
•
When you hear the tone that you prefer, press
TRANSFER
to save it.
NOTE: Specific lines or stations may be programmed to ring with a dif-
ferent tone than what you have selected for your keyset.
CHANGE YOUR PASSCODE
From the factory, your station passcode is 1234. You can change your sta-
tion passcode whenever you desire.
•
While on-hook, press
TRANSFER
and then dial
101
.
•
Dial your old passcode.
•
Dial a new passcode (must be four characters). You can use
0
–
9
.
•
Redial the new passcode to verify. If successful, you will hear two beeps.
Four beeps indicate an incorrect code. Reenter the code again.
•
Press
TRANSFER
to store the new passcode.
OHVA REJECT
Your keyset can be programmed with an OHVA Reject (
REJECT
) key.
Pressing this key while receiving an OHVA call will disconnect the voice an-
nouncing party and return you to your original call.
IN GROUP/OUT OF GROUP
If your keyset is assigned to a station ring group, you can remove your key-
set from the group and then put it back in. While you are out of the group,
you can receive calls to your extension number but not calls to the group
number. If you have an
IN/OUT
key:
•
Press the
IN/OUT
key. It will light red when your keyset is in the group.
•
Press the
IN/OUT
key again to exit the group and turn the light off. Re-
peat as necessary.
If you do not have an
IN/OUT
key:
•
Dial the
IN/OUT
access code number ________________ plus
0
to exit
the group or
1
to enter the group.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press
SPEAKER
key.
The
IN/OUT
key can include an extender to indicate the specific group that
this key will affect. This means that if you are in multiple groups, you can de-
cide for which groups you will receive calls.
42
HOME PAGE
Table of Contents
Guide-Contents
