23
- English
Settings
7.
Select the
IP setting
field, and then set it to
Enter manually
.
8.
Select a network parameter to enter (
IP
Address
, for example), and then press
OK
button. Use the
,.
buttons on the remote
control to enter the numbers for the parameter.
Or use the Num keypad to enter a parameter
number.
Press and hold the
123
button until the
Num pad appears on the screen. When the Num
pad appears, select a number using the
,.
button and then press the
OK
button.
Use the
buttons on the remote control to move from
entry field to entry field within a parameter. When
done with one value, press the
OK
button.
9.
Press the
,
or
.
button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
10.
Repeat Steps 8 and 9 until you have filled in all
parameters.
✎
You can get the Network parameter values from
your Internet provider.
11.
When finished, select
OK
, and then press the
OK
button. The Security screen appears.
12.
On the Security screen, enter your network's
security code or pass phrase. Enter letters by
selecting a letter with the
,.
buttons, and
then pressing the
OK
button.
13.
When finished, select
Done
at the right of the
screen, and then press the
OK
button. The
product verifies the network connection and
then connects to the network.
14.
After the home cinema verifies the network,
select
OK
, and then press the
OK
button.
✎
You can also begin the Manual Network setup by
going to
Settings > Network > Network Status
.
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the
WPS(PBC)
function.
If your wireless router has a
WPS(PBC)
button, follow
these steps:
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 21:
1.
In the
Network Settings
screen, change
Network type
to
Wireless
. The product
searches for and then displays a list of the
available networks.
2.
Scroll the list down, select
WPS(PBC)
, and then
press the
OK
button.
3.
Press the
WPS(PBC)
button on your router
within two minutes. Your product automatically
acquires all the network settings values it needs
and connects to your network after the network
connection is verified.
4.
When it is done, highlight
OK
, and then press
the
OK
button.
✎
For a WPS connection, set your wireless router’s
security encryption to AES. WEP security
encryption does not support a WPS connection.
Wi-Fi Direct
The
Wi-Fi Direct
function allows you to connect
Wi-Fi Direct
devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎
Some
Wi-Fi Direct
devices may not support the
AllShare function if connected via
Wi-Fi Direct
. If
this is the case, change the network connection
method you used to connect the device to the
home cinema.
✎
Wi-Fi Direct
transmissions can interfere with
Bluetooth signals. Before you use the Bluetooth
function, we strongly recommend that you turn off
the
Wi-Fi Direct
function on any device in which
it is currently on.
1.
Turn on the
Wi-Fi Direct
device and activate its
Wi-Fi Direct
function.
2.
In the Home screen, select
Settings
, and then
press the
OK
button.
3.
Select
Network
, and then press the
OK
button.
4.
Select
Wi-Fi Direct
, and then press the
OK
button.
The
Wi-Fi Direct
devices that you can connect
the home cinema to appear.
Refresh
Wi-Fi Direct
Device Name : [HTS]H6550WM
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Disconnected
Close
Settings
HT-H6550WM-XY-0519.indd 23
HT-H6550WM-XY-0519.indd 23
2014-05-19 4:22:07
2014-05-19 4:22:07
