21
- English
Settings
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as Smart Hub and BD-LIVE, and upgrade the
product's software through the network connection.
For more information about accessing and using
Internet services, see the Network Services chapter
of this manual on pages 42~49. Instructions for
configuring the network connection start below.
Configuring Your Network Connection
If you didn't configure your network connection during
the initial settings procedure or you need to reset the
network connection, follow the directions below.
Before you begin, contact your Internet Service
Provider to find out if your IP address is static or
dynamic. If it is dynamic, and you have a wired
or wireless network, we recommend using the
Automatic configuration procedures described below.
If you are connecting to a wired network, connect the
product to your router using a LAN cable before you
start the configuration procedure.
To begin configuring your network connection, follow
these steps:
1.
In the Home screen, select
Settings
, and then
press the
OK
button.
2.
Select
Network
, and then press the
OK
button.
3.
Select
Network Settings
, and then press the
OK
button.
4.
Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks starting on page 22.
Wired Network
Wired – Automatic
After following Steps 1 to 3 above:
1.
In the
Network Settings
screen, change
Network type
to
Wired
. Then, select
Connect
and press the
OK
button. The product detects
the wired connection, verifies the network
connection, and then connects to the network.
2.
When it is done, highlight
OK
, and then press
OK
button.
Wired - Manual
If you have a static IP address or the automatic
procedure does not work, you'll need to set the
Network Settings
values manually.
After following Steps 1 to 3 above:
1.
In the
Network Settings
screen, change
Network type
to
Wired
. Then, select
Connect
and press the
OK
button.
The product searches for a network, and then
displays the connection failed message.
✎
If it is possible to connect the home cinema to
your network wirelessly, select
Change Network
at this point, change the
Network type
to
Wireless
, and then go to the instructions for
wireless networks on the next page.
Network Settings
Wired network connection failed.
MAC Address
XX:XX:XX:XX:XX:XX
IP Address
0. 0. 0. 0
Subnet Mask
0. 0. 0. 0
Gateway
0. 0. 0. 0
DNS Server
0. 0. 0. 0
Unable to connect to the network. Try the following: check if your IP address is set
correctly in IP Settings. Contact your Internet service provider for more information.
Change Network
IP Settings
Retry
Close
2.
Use the
buttons to select
IP Settings
, and
then press the
OK
button. The
IP Settings
screen appears.
3.
Select the
IP setting
field, and then set it to
Enter manually
.
4.
Select a parameter to enter (
IP Address
, for
example), and then press
OK
. Use the
,.
buttons on the remote control to enter the
numbers for the parameter. Or use the Num
keypad to enter a parameter number.
Press and
hold the
123
button until the Num pad appears on
the screen. When the Num pad appears, select a
number using the
,.
button and then press
the
OK
button.
Use the
buttons on the
remote control to move from entry field to entry
field within a parameter. When done with one
parameter, press the
OK
button.
5.
Press the
,
or
.
button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.
HT-H6550WM-XY-0519.indd 21
HT-H6550WM-XY-0519.indd 21
2014-05-19 4:22:02
2014-05-19 4:22:02
