Page 40
3.41 PROGRAMMING STATIONS TO
PAGING ZONES
Allows the System Administrator to assign a keyset to any of the four internal paging zones and all call
page (page plus
∗
). The total number of keysets that can receive a page is limited to 80. A keyset may
be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as “1” in a zone column, it
will receive pages for that zone. If the keyset is flagged as “0,” it will not receive pages for that zone.
Keysets can receive pages for more than one zone or can be programmed not to receive an all call
page.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next program
HOLD
Used to clear entry
ACTION
DISPLAY
1. Press
TRSF 604
ENTRY:STN :1234
∗
Display shows
01:NONE: 00001
2. Enter index number (01–80, eg.,
05
)
ENTRY:STN :1234*
via dial key pad OR press
UP
or
05:NONE: 00001
DOWN
key to make selection and
press RIGHT soft key to move
cursor
3. Enter station number (eg., 205) via
ENTRY:STN :1234
∗
dial key pad OR press
UP
or
05:205 : 00001
DOWN
key to make selection and
press RIGHT soft key to move
cursor
4. Move cursor under page zone
ENTRY:STN :1234
∗
desired by pressing
UP
or
05:205 : 01001
DOWN
key and enter the digit
1
under zone and press RIGHT soft
key to return to step 2 to continue
with entries
5. Press
TRSF
to store and exit OR
press
SPEAKER
to store and
advance to next program
