Page 13
3.14 MANAGING KEY ASSIGNMENTS
You can view station key assignments and add extenders to some of the programmable keys for easy
one-touch operation of frequently-used features. An extender is a number that makes an otherwise
general soft key very specific. Adding the digit
4
to a
PAGE
key defines this key for paging zone four.
Adding 225 to a directed pick-up key defines this key as pick-up for extension 225 only. The soft key
must already be assigned by the installing technician. Adding extenders allows one- touch operation for
that feature.
Use this program to assign extenders to the following soft keys:
KEY
EXTENDER
BOSS
Boss and Secretary (1 - 4)
DIR
PERS(1), SYS(2) or STN(3)
DP
Direct Pick-up (station or group no.)
DS
Direct Station Select (station or group no.)
FWD
Call Forward (0 - 5)
GPIK
Group Pick-Up (01 - 20)
IG
In/Out of Group (501- 519/529)
MMPG
Meet Me Page (0 - 9, *)
PAGE
Page (0 - 9, *)
PMSG
Programmed Message (01 - 20)
SP
UCD Supervise (UCD group no.)
SPD
Speed Dial (00 - 09, 500 - 999)
PROGRAM KEYS
UP & DOWN
- Select the extension number.
KEYPAD
- Used to enter extender codes.
HOLD
- Used to clear the displayed data.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Press
TRSF 107
Display shows
[201] KEY EXTEND
01 : CALL1
2. Dial the station number (eg.
205
) OR
press
UP
or
DOWN
to select the station
[205] KEY EXTEND
01 : CALL1
and press the RIGHT soft key to move
3. Enter the key number (e.g. 18) OR use
UP or DOWN
to scroll through the keys
[205] KEY EXTEND
18 : DS -> DS_
and use the RIGHT soft key to move the
cursor OR press the key to be
programmed
4. Dial the extender according to the list
above OR use
UP or DOWN
to scroll
[205] KEY EXTEND
18 : DS -> DS207
through the keys and press the LEFT soft
key to return to step 3 OR the RIGHT soft
key to return to step 2
5. Press
TRSF
to store and exit
programming OR press
SPEAKER
to
store and advance to the next program
