Page 43
GPIK:
Group Pick Up. Allows calls ringing at a group to be picked up. An extender
can be assigned eg. GPIK 501.
HDSET: *
DCS 70 ONLY. Headset Mode. Toggles keyset between Headset & Handset
mode. Key will light when headset mode is set.
HLDPK:
Hold Pick Up. Allows a call is on hold to be retrieved by pressing this key
followed by the station number that put the call on hold or the held trunk
number.
IG:
In / Out of group. If only IG is entered user must specify which group they wish
to log in/out of. An extender may be assigned to this key eg. IG 501
INQUIRE:
Inquire. By pressing this key then entering a trunk number the user can read
the CLIP data for a held call on that trunk.
ISPY:
I Spy. Allows station user to view the dialled external number of a busy
extension and gives options to either Barge in or Drop the call. Note: the
station passcode must be changed from the default 1234.
LCR:
Lease Cost Route Calls will be made via the most cost effective route, if
programmed.
LISTN:
Listen. When on a call using the handset, pressing this key enables the
conversation to be heard through the speaker, the microphone remains muted.
LNR:
Last Number Redial.
MMPA:
Meet Me Page Answer.
MMPG:
Meet Me Page.
MSG:
Message Waiting Indication. NOTE: this key is not for SVM-800 message
indication.
MUTE:
Mute key. Mutes either the handset or microphone when on a call. The key will
light to indicate the mute condition.
NEW:
New Call key:Terminates the existing call, allowing you to make another call.
NIGHT:
Night. Allows access to night mode setting (note COS reliant) Lights steady
when system in night mode.
NND:
Name Number Display. Pressing this key whilst in conversation will toggle the
display between the CLIP name if any and the CLIP number.
NXT:
Next. Displays the CLIP name/number of the waiting call at your station.
OHVA:
Off Hook Voice Announcement. Pressing this key after dialling a busy ext on
an external call allows you to communicate with the internal station without
intruding on the conversation.
OPER:
Rings assigned operator group. Default 500.
PAGE:
Allows a Page call. A valid page zone can be assigned as an extender eg.
PAGE 1 (page zone 1)
PARK:
DCS 70 only. Call park / retrieve. Pressing this key places a call on hold in a
park slot; park slot can either be entered after pressing Park key or
programmed as a key extender.
PAUSE:
Pause. Inserts a pause (break) in dialled digit stream.
PGPK:
Page Pickup Allows a parked call to be picked up when announced via a
page. Pressing this key then a ext number which made the page or the line
number of the parked call will pick up that call
PGMMSG:
Program Message. An extender may be programmed to specify a specific
system message number.
REJECT:
Blocks an OHVA announcement at the keyset.
RETRY:
Retry on Busy. Only for PSTN TKs Retry is given as a soft key option on LCD.
REVW:
CLIP Review. Review CLIP information of previous calls.
SETMG:
Set Message for ext.
SG:
Station Group . Calls a specific group when pressed. eg. SG 501
SNR:
Saved Number Redial. Saves a number for dialling later
SP:
UCD Supervisor. Enter UCD Supervisor mode. Presents 3 options CALL,
ADMIN , AGENT A Specific group number must be programmed as an
extender eg. SP 510
SPD:
Speed Dial. A specific speed dial can be assigned as a key extender eg. SPD
500
SPKR
Speaker Key. For use with Falcon Keysets
STORE:
Store Clip information in personal speed dial location (uses next free location)
TG:
Trunk Group. A specific trunk group can be assigned as a key extender eg. TG
81
