Page 3
3.4
PROGRAM STATION ANSWER MODE
Allows a System Administrator to change the answer mode of any keyset or add-on module. Each
keyset or add-on module can have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing the
ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer calls on the speaker
phone. When a CO line is transferred to a keyset in Auto Answer, the screened portion of the call will be
Auto Answer, but the keyset or add-on module (AOM) will ring when the transfer is made if the user has
not pressed the ANS/RLS key or lifted the handset.
2. VOICE: ANNOUNCE after a short attention tone, callers can make an announcement but the
ANS/RLS key or handset must be used to answer calls.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next program
HOLD
Used to clear previous entry
ANS/RLS
Used to select ALL
ACTION
DISPLAY
1. Press
TRSF
103
[201] ANS MODE
Display shows
RING MODE
2. Dial keyset number (eg.,
205
) OR
[205] ANS MODE
Press
UP or DOWN
to select keyset OR
RING MODE
Press
ANS/RLS
to select all Stations
[ALL] ANS MODE
Press RIGHT soft key to move cursor
?
3. Dial
0, 1
or
2
to change ring mode OR
[205] ANS MODE
press
UP or DOWN
to select ring mode
VOICE ANNOUNCE
and press RIGHT soft key to return to
step 2above
4. Press
TRSF
to store and exit OR
press
SPEAKER
to store and advance
to next program
