Page 1
1. SPECIAL FEATURES
NOTE: Please note that features marked with an * may not be available on all models and software versions.
Please check with your Samsung DCS supplier.
1.1
NIGHT SERVICE OPERATION
(AUTOMATIC OR MANUAL)
Your system is designed to have an alternate mode of operation generally designated as Night Service.
Night Service permits incoming calls to answered differently to normal day operation. Night Service is
available on an individual tenant basis and may be set manually or automatically. While in
NIGHT
mode, stations will be limited to their individual night class of service dialling restrictions. You can put
the system in or out of Night Service at any time. For automatic Night Service, each tenant has an on-
time and an off-time for each day. If no automatic timer is set, Night Service must be turned on and off
manually.
1.2
AUTOMATIC NIGHT SERVICE
Automatic Night Service is turned on or off according to the programmed on and off times. These
programmed times use the system clock as a reference, so the system clock must be set correctly.
Pressing the manual
NIGHT
key will override the automatic mode until the next programmed time in all
software versions prior to July 1998 (Version 5.0). In Version 5.0 software manual setting will have
priority over automatic night mode ie. the system once manually set will stay in night mode until
changed manually.
1.3
MANUAL
NIGHT
SERVICE
Press the
NIGHT
button on any keyset associated with the tenant group that wants to enter Night
service. Enter the Night service passcode and press 1 to enter Night Service. The NIGHT key on all
keysets in that tenant group will light red to indicate that Night Service has been set for that tenant.
To enter day service, press the
NIGHT
button, enter the night service passcode followed by the digit 0
to exit night service and enter day service.
1.4
HOLIDAY MODE *
This feature allows up to 120 holiday dates to be programmed into the system, so that when automatic
night service is selected the system will remain in night service for the programmed holiday. When
using the optional Automated Attendant or Digital Voice Mail system your callers will receive the night
greeting. This feature is programmable in later software releases.
1.5
CALLING THE SYSTEM OPERATOR
Any station that dials
9
will ring its assigned operator. (If tenant service is used, each tenant may have a
different operator or operator group.) Calls to the system or tenant operator are easily identified
because the CALL key will have a rapidly flashing red light. Station users will never receive a busy
signal when they dial
9
or the operator group number. The calls will continue ringing in queue until
answered.
