Page 23
3.23 SETTING KEYSET RING TONES
Allows the System Administrator to select the type of ring tone heard at each keyset. There are eight ring
tones available at each keyset. A short tone burst of the selection will be heard when the dial key pad is
pressed.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next program
HOLD
Used to clear previous entry
ANS/RLS
Used to select ALL keysets
ACTION
DISPLAY
1. Press
TRSF 111
[201] RING TONE
Display shows
FREQUENCY 6
2. Dial keyset number (eg.,
205
) OR
[205] RING TONE
press
UP
or
DOWN
to select station
FREQUENCY 6
and press RIGHT soft key to move cursor
OR press
ANS/RLS
to select All keysets
[ALL] RING TONE
FREQUENCY?
3. Dial
1-8
to select ring tone OR press
[205] RING TONE
UP
or
DOWN
to select ring tone and
FREQUENCY 6
press RIGHT soft key to move cursor and
return to step 1
[ALL] RING TONE
FREQUENCY 6
4. Press
TRSF
to store and exit OR
press
SPEAKER
to store and advance to
next program
