Page 36
3.38 PROGRAM AUTOMATIC NIGHT MODE OPERATION
Allows the System Administrator to set the time the system will enter into night mode automatically by
utilising time and day tables. A NIGHT key is not needed as the system will switch automatically.
However, it is helpful to have a dedicated button so the status can be manually changed. The start time
is the time the system will switch from day to night service the end time is the next day (eg., start 1730
WED, end 0800 THUR) This prevents entering of start and stop times on the same day.
FEATURE KEYS
0
SUN
4
THU
1
MON
5
FRI
2
TUE
6
SAT
3
WED
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next program
HOLD
Used to clear previous entry
ACTION
DISPLAY
1. Press
TRSF
507
NIGHT TIME (SUN)
Display shows
ST : _
END :
2. Dial day number (0-6 eg., 3) OR
NIGHT TIME (WED)
press
UP
or
DOWN
key to select day
ST : _
END :
and press RIGHT soft key to advance
cursor to step 3
3. Dial in start time for night (eg.
1730
)
NIGHT TIME (WED)
If time entered is valid, cursor moves
ST : 1730
END : 0800
to end time enter end time If time
entered is valid, the system returns to
step 2
4. Press
TRSF
to store and exit OR
press
SPEAKER
to store and
advance to next program
