Page 30
3.32 PROGRAM ALARM SENSOR NAME
Allows the System Administrator to assign a name to an alarm sensor. Names are written using the
using the procedure in
3.5 PROGRAM STATION NAMES.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next program
HOLD
Used to clear previous entry
A
Key 19, acts as toggle between upper case and lower case
ACTION
DISPLAY
1. Press
TRSF 213
[3501] ALARM NAME
Display shows
2. Dial ALARM number ( eg.,
3502
) OR
[3502] ALARM NAME
press
UP
or
DOWN
key to make
_
selection and press RIGHT soft key to
move cursor
3. Enter in name using above method and
[3502] ALARM NAME
table press RIGHT soft key to return to
FIRE!
step 2
4. Press
TRSF
to store and exit OR
press
SPEAKER
to store and advance to
next program
Note
: This program is not applicable to DCS Compact and DCS 24 Systems.
