Page 26
3.27 SETTING KEYSET RINGER VOLUME
Allows the System Administrator the ability to assign a system-wide level for each station ringer volume..
There are eight levels of volume; level 1 is the lowest and level 8 is the highest. For early versions of
software this feature is programmed using MMC 118; later versions use MMC 114.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next program
ANS/RLS
Used to select ALL stations
ACTION
DISPLAY
1. Press
TRSF 118
[201] RING VOL.
Display shows
RING VOLUME 1
2. Dial station number (eg.,
205
) OR
[205] RING VOL.
Use UP and DOWN to select station
RING VOLUME 1
and use the RIGHT soft key to move the
cursor OR press
ANS/RLS
to select all
[ALL] RING VOL.
stations
RING VOLUME ?
3. Enter value 1-8 (eg.,
5
) OR press
UP
or
[205] RING VOL.
DOWN
key to make selection and press
RING VOLUME 5
the RIGHT soft key to return to step 2
Note
: you will hear a short burst of ring at
the selected value
3.28 PROGRAMMING CLIP PRESENTATION
This program allows the System Administrator to set what CLIP information will be displayed on an LCD
keyset. If CLIP name is chosen the details must be programmed in the CLIP translation table as per 3.18
above. The CLIP display options are as follows:
0
NO DISPLAY
No CLIP data will be displayed.
1
NUMBER ONLY
The CLIP number received from the central office
will be displayed first.
2
NAME ONLY
The CLIP name will be displayed first
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SPEAKER
Save data and advance to next program
ANS/RLS
Used to select ALL stations
