Doc.-ID: 200514-PT08BA-SS-ExCam XPT-Q6075_en_rev.00.docx, Page 10 of 28
5
Electrical connection
Attention!
The electrical connection of the equipment must only be carried out by
officially qualified and skilled personnel!
Attention!
It is absolutely necessary to ground the ExCam
®
series housing via the
PA connection.
Attention!
The minimum length of the connecting cable must not be less than
three meters! The connection cable must be protected!
Attention!
Please pay attention to the national security, installation and accident
prevention regulations (e.g. DIN EN 60079-14) and the safety instruc-
tions given below in this User Manual, as well as the ones in the Instal-
lation Guidelines!
The ExCam
®
XPT Q6075 is equipped with an electrical connection cable of type
ASKDP03-T and a pre-assembled and pre-wired terminal box ExTB-3. The maximum
transmission range from the camera to the next active network interface is 100 meters and
can be individually specified by the client. The user is NOT authorised to do any electrical
connection procedures inside the pressure-resistant enclosure.
