Doc.-ID: 200514-PT08BA-SS-ExCam XPT-Q6075_en_rev.00.docx, Page 23 of 28
6
Opening the pressure-resistant housing
To open the TNXCD housing, you need a special tool. The customer should not open it. If
you think that the housing has to be opened for unforeseeable reasons, please contact our
support tem at first (
Always adhere to the explosion-relevant rules:
„WARNING – MAY NOT BE OPENED IN HAZARD AREAS.“
Note: Depending on classification of hazard areas, a work approval has
to be obtained.
Even after switching on the power supply, it is absolutely imperative to
avoid potentially explosive atmosphere when opening the camera
housing. Opening the housing requires disassembly and working in a
safe (i.e. non-explosive!) area.
Attention!
Heed that you do not damage the thread surface of the flame-proof gap.
Attention!
Heed that you do not damage the housing seals. Keep them clean!
