Doc.-ID: 200514-PT08BA-SS-ExCam XPT-Q6075_en_rev.00.docx, Page 7 of 28
3
Safety Instructions
Please absolutely adhere to the directions for safety in the
installation instructions for the T08 ExCam series!
Quick link:
It is absolutely mandatory to observe the national safety regulations and regulations
for prevention of accidents, as well as the safety instructions given below in this
User Manual!
Attention!
Cameras of the type T08 ExCam are not suitable for use in zone 0 and
zone 20. The ambient temperature, temperature class and explosion
group as stated on type plate must be observed! Alterations are not
permitted! The camera is to be operated in sound conditions and in the
intended way.
Attention!
Only original parts of SAMCON Prozessleittechnik GmbH may be used
for repairs. Repairs concerning the explosion protection may only be
carried out in accordance with the nationally applied regulations and by
SAMCON Prozessleittechnik GmbH.
Attention!
Prior to installation, take external sources of heat or cold into account!
The temperature ranges prescribed for storage, transport and operation
must be adhered to!
Attention!
Observe the warnings given on the type plate:
“WARNING – DO NOT OPEN IN HAZARD AREAS“
“WARNING – DO NOT OPEN WHILE ENERGIZED“
The use in hazardous areas with regard to temperature and dust layers
is defined in the respective national regulations.
When installing the ExCam, adhere to the requirements of the EN/IEC
60079-14.
