Doc.-ID: 200514-PT08BA-SS-ExCam XPT-Q6075_en_rev.00.docx, Page 26 of 28
8
Maintenance/ Modification
The applicable regulations for the maintenance and servicing of electrical devices in po-
tentially explosive atmospheres must be adhered to.
The required maintenance intervals are specific to the individual devices. The operating
company has to determine these intervals depending on the application parameters. The
maintenance tasks especially include examination of parts on which the ignition protection
depends (e.g., proper condition of the casing, seals and cable entry points). If maintenance
measures are necessary they have to be initiated and/or executed.
9
Reparation
Reparations must only be carried out with original parts of SAMCON Prozessleittechnik
GmbH. Damaged pressure-resistant housings have to be replaced completely. In case of
doubt, send the part in question back to SAMCON Prozessleittechnik GmbH.
Reparations affecting the explosion protection must only be carried out in accordance with
nationally applicable regulations - by SAMCON Prozessleittechnik GmbH or by an electri-
cian specially authorised by SAMCON Prozessleittechnik GmbH.
Rebuilding of or alterations to the devices are not permitted!
10
Disposal/ Recycling
When disposing of the device, nationally applicable regulations must be observed.
This Document is subject to alterations and additions.
