Salvis VitalityEVO-Easy Скачать руководство пользователя страница 72

Страница: 72 / 80

72 / 80

15.1

Transporting the appliance

IMPORTANT! Risk of damaging seals on the underside of the appliance!

‒ Take care not to damage the seals during transportation.

‒ Remove the in-transit protection only once all supply/drain lines are connected and the appliance

has been set up at its final installation site.

Appliance foot

Seal

In-transit protection

Front panel

locked to app
liance foot

Condition when delivered

A seal is fitted to the underside, front and sides
of the appliance.

‒ This seal prevents dirt getting underneath

the appliance and also stops the appliance
from sliding about when installed.

In-transit protection is fitted to the appliance
feet (left and right).

‒ A piece of felt is attached to the underside

of the in-transit protection to make it easier
to move the appliance at the installation
site.

Use a pallet truck or forklift to move the appliance to the installation site on the cargo pallet.

Wear protective gloves!

● Remember – the appliance is very heavy! Always work with proper back posture.

● Risk of damage! If the appliance is stored or moved at temperatures below zero, let the appliance

warm up properly before connecting it up:

−

At a room temperature of over 10 °C/50 °F, for example

−

Warm-up time at least 24 hours

15.2

Information about the installation site

● Set up the appliance so that operators can see the Gastronorm containers in the cooking cham

ber.

● Provide adequate clearance above the appliance. Topping-up regeneration salt must be easy and

straightforward.

● Provide adequate space to stand when operating the appliance. This space should be adequate

for using the appliance without a risk of personnel hitting other personnel with tools, etc.

● If the appliance is operated in areas with customers, install appropriate machine guards to ensure

that customers cannot come into contact with the appliance.

Содержание VitalityEVO-Easy

















































































Результаты поиска

Содержание VitalityEVO-Easy

Отзывы:

Похожие инструкции для VitalityEVO-Easy

Бренды по названию

Популярные бренды

Salvis VitalityEVO-Easy, Руководство по эксплуатации

Результаты поиска

Содержание VitalityEVO-Easy

Отзывы:

Похожие инструкции для VitalityEVO-Easy

Бренды по названию

Популярные бренды