Salvis VitalityEVO-Easy Скачать руководство пользователя страница 48

Страница: 48 / 80

48 / 80

Sounds

Step change

Program end

Warning sig
nal

Key sound

Ext. signal

Slider (scroll)

Setting the acoustic signals (tones)

Several sound files are included as a factory default. These
can be used variously for a range of different messages.

Turn the volume up so that a selected sound can
be heard when a sound file is opened.

● Slider control: left quiet – right loud.

Tap the arrow key.

● The available files are displayed.

● A scrollbar will be shown if there are a large num

ber of files available.

Tap the arrows or the scrollbar and scroll until the
file you want is visible.

Tap your chosen selection.

● An acoustic signal sounds.

Tap the "Save" key.

● A message about the save process is displayed.

Tap the "Confirm" key.

● The message disappears.

Continue to the next window – tap the arrow key.

Information about settings options:

Program end:

signal sounds at the end of the cooking process.

Step change:

In cooking programs with different operating modes, a signal sounds before swit

ching to the next mode.

Warning signal:

when messages with a red or yellow background appear on screen.

Combi-cooking insertion time:

signal sounds when an insertion time expires.

Key sound:

sound played when tapping keys.

External signal:

External speaker or a lamp external to the device (must be installed on-site by

the customer).

Содержание VitalityEVO-Easy

















































































Результаты поиска

Содержание VitalityEVO-Easy

Отзывы:

Похожие инструкции для VitalityEVO-Easy

Бренды по названию

Популярные бренды

Salvis VitalityEVO-Easy, Руководство по эксплуатации

Результаты поиска

Содержание VitalityEVO-Easy

Отзывы:

Похожие инструкции для VitalityEVO-Easy

Бренды по названию

Популярные бренды