Salvis VitalityEVO-Easy Скачать руководство пользователя страница 65

Страница: 65 / 80

65 / 80

Cleaning in progress/keep cooking cham

ber door closed

Cleaning process

● The progress bar indicates the time left for the

process.

Once the cleaning process has completed:

‒ The "Cleaning program" display disappears
‒ The "Start screen" display appears
‒ Perform manual cleaning tasks,

see from

page 63 , section 11.3 and 11.4.

12.

Regenerating the water softener

Please be aware that the regeneration process takes approximately 45 minutes. Always schedule
the regeneration process at times when you are not cooking.

Requirements for regeneration salt

Use regeneration salt with a grain size of 1.4 to 4 mm.

Do not use cooking salt. Cooking salt not only reduces the efficiency of the water softener but can
also damage the ion-exchange resins.

12.1

Regeneration prompts

Important!

Water softener usage
at 90%.

Please start the regen
eration process!

Usage at 90%

● If water softener usage is at 90%, you are shown a

prompt stating that the water softener regeneration now
needs to be started.

● To avoid interrupting normal business operations, regene

ration can also be scheduled for completion at a later
point in time.

Please note

5041: Water softener
is contaminated!

Please perform regen
eration!

Usage at 95%/contaminated

● If water softener usage is at 95%, the water softener

regeneration must be started immediately. This message
is also shown if the regeneration process was interrupted
(water is contaminated).

● The appliance cannot be used until the water softener

regeneration process has been completed.

12.2

Starting the regeneration process

Important!

Water softener usage
at 90%.

Please start the regen
eration process!

Regeneration process prompt

● You are prompted to regenerate the water soft

ener before water softener usage reaches 100%.

Tap the "Confirm" key.

● The start screen is shown, as well as the "Regen

erate" key.

Содержание VitalityEVO-Easy

















































































Результаты поиска

Содержание VitalityEVO-Easy

Отзывы:

Похожие инструкции для VitalityEVO-Easy

Бренды по названию

Популярные бренды

Salvis VitalityEVO-Easy, Руководство по эксплуатации

Результаты поиска

Содержание VitalityEVO-Easy

Отзывы:

Похожие инструкции для VitalityEVO-Easy

Бренды по названию

Популярные бренды