23
OwnersManual-TileSaw-CTC705-Rev11-2023
Belt Replacement
1. Turn off the saw before proceeding any further.
2. Loosen and remove the belt guard screws, then remove the belt guard.
3. Leave the blade tight in position and use your hand to hold the blade shaft tightly.
Now loosen the pulley lock screw on the blade shaft pulley.
4. Carefully loosen the pulley and belt outward slightly, so there is a little slack in the belt.
5. Remove the old belt and replace with the new belt.
6. To reassemble, follow steps in reverse order.
Belt Guard Removal
Bent Tensioning
Over time the CTC705 belts will need to be re-tensioned. This is a normal maintenance item that
must be performed with any machine utilizing micro-v belts. With usage the micro-v belts will stretch
and wear which increases the length of the belt and decreases the belt tension.
SAW MAINTENANCE &
TROUBLE SHOOTING
Содержание NORTON clipper CTC705
Страница 1: ...OWNER S MANUAL WET TILE SAW 7 Model CTC705...
Страница 33: ...32 OwnersManual TileSaw CTC705 Rev11 2023 CTC705 Exploded View SAW EXPLODED VIEW...
Страница 35: ...34 OwnersManual TileSaw CTC705 Rev11 2023 This page is left intentionally blank NOTES...
Страница 36: ...35 OwnersManual TileSaw CTC705 Rev11 2023...