SAINT-GOBAIN NORTON clipper CTC705, Руководство пользователя

Страница: 17 / 36

16
OwnersManual-TileSaw-CTC705-Rev11-2023
c) Overload Protector (Thermal) issues see Overload Protector (Thermal) Tips
page 17.
d) Low voltage at the machine see Power Supply page 18
Tripping of Circuit Breaker:
a) If tripping while starting machine
Circuit Breaker issue: weak, damage, to low amperage
b) If tripping while cutting any material:
Incorrect blade for the material being cut.
5. What are you cutting?
6. Wet/dry?
If cutting dry give the blade a chance to cool off and breath. The heat will build up and can
affect the performance of the motor as the blade lose tension.
7. What blade is being used?
Use the correct blade for the material being cut.
9. What cutting method is being used. Change cutting methods.
9. May need to go to Authorized Service Center to diagnose and repair
GENERAL ELECTRICAL
TROUBLE SHOOTING