SAIC MG 6, Руководство по обслуживанию

Страница: 46 / 357

Instruments and Controls
Tyre Pressure
will appear in the message centre. Adjust
your tyre pressure.
If there is a fault with the system, the light will flash for
about 90 seconds then remains on.
Tyre Pressure
System Fail will appear in the message centre. Seek
an MG Authorised Repairer.
Stability Control / Traction Control Operation
and Fault Warning - Yellow
The light illuminates yellow as a lamp check when the
ignition is in position
Ⅱ
and extinguishes after a few
seconds. If there is a fault with the system, the warning
light will illuminate when the car is being driven.
The
message centre will display Stability Control Fail or
Traction Control Fail
as appropriate. Stop the car
as soon as safety permits and contact MG Authorised
Repairer for inspection at your earliest convenience. If the
warning light flashes during driving, this indicates that the
system is taking control to assist the driver.
Stability Control / Traction Control Off
Warning - Yellow
O F F
The light illuminates yellow as a lamp check when the
ignition is in position
Ⅱ and extinguishes after a few
seconds. If dynamic stability control system or traction
control system are switched off, the warning light will
illuminates. The message
Stability Control Off
or
Traction Control Off will appear in the message
centre.
ABS Warning - Yellow
ABS
The light illuminates for a few seconds as a lamp and system
check when the ignition is in position
Ⅱ . If the light does not
extinguish, and
ABS Fail
appears in the message centre,
then a fault has occurred with the ABS system and you
should seek an MG Authorised Repairer at the earliest
opportunity.
28