SAIC MG 6, Руководство по обслуживанию

Страница: 274 / 357

Starting & Driving
Resume
After the cruise system is haled, if the cruise system is not
shut down all the time, you can reactivate the cruise system
by operating the resume/suspend switch (3 in the figure).
At this time, the cruise target speed is the target speed
prior to cruise system exit.
Note:
• Never use the cruise control system in the reverse
gear.
• Do not use the cruise control system on the slippery
road during rainy days or under the traffic condition
that a constant speed is not permitted.
• ALWAYS switch off the master switch when you no
longer intend to use the cruise control system.
• When the automatic transmission is in "sport"
mode, it is not recommended to use the cruise
control system.
• When the cruise system operates, there may be
a certain deviation between the actual speed and
cruise target speed due to the road conditions (such
as uphill, downhill, etc.).
• Due to slope road or road surface, etc., when the
actual speed is too much lower than the target
speed or SCS is triggered, it may cause the cruise
system to automatically return to standby mode.
• Do not press a switch for a long time or press
multiple switches simultaneously, otherwise it may
lead to cruise control failure.
If this condition
occurs, please turn on the ignition switch again.
256