- 150 -
MF 6990dn - Agoris C935
16 -
Characteristics
Thick paper
Paper is considered to be thick when its weight exceeds 90 g/m² (24 lb).
Recommendations for use
Avoid placing different types of paper (different weights or formats) in the manual feeder as this may risk causing paper
jams.
Envelopes
Recommendations for use
Use envelopes:
• For laser printers, with diagonal closure, ordinary pre-glued folds, edges and flaps.
• Approved for laser printing.
• Dry.
Do not use envelopes:
• With self-adhesive flaps.
• With adhesive ribbons, metal attachments, clips or removable strips.
Main and additional paper tray
Manual feeder
Capacity
Not supported
Up to 20 sheets depending on
thickness.
Orientation
Not supported
Print side facing down
Driver
Thick 1 (91 to 150 g/m² )
Thick 2 (151 to 210 g/m² )
Weight
91 to 210 g/m² (25 to 55.9 lb)
Duplex
Not supported
Notice
Banner paper can be printed if it complies
with the following conditions:
Weight between 127 and 160 g/m²
Maximum width 216 mm
Maximum length 357 mm
Main and additional paper tray
Manual feeder
Capacity
Not supported
Up to 10 envelopes depending on
thickness.
Orientation
Not supported
Print side facing down
Driver
Envelope
Weight
91 to 163 g/m² (25 to 43 lb)
Duplex
Not supported
Notice
Envelopes must be printed on the address
side. It is recommended to print outside the
three-play zones (front+back+flap) in order
to avoid printing problems (poorly printed
characters, etc.).