Sagem MF 6990dn, Руководство пользователя

Страница: 38 / 154

- 38 -
MF 6990dn - Agoris C935
4 -
Configuring the machine and the servic-
Configuring the SNMP console
The machine is supplied with the following integrated
management information bases (MIBs):
• MIB-II (RFC 1213), sys, udp, tcp, ip, icmp, if, snmp
• PPP (RFC 1471, 1472, 1473)
• MIB Ressource hôte (RFC 2790)
• Imprimante MIB (RFC 3805)
• Moniteur de port d’imprimante (pwg 5107.1)
Configuring the SMTP server
This setting is automatically activated when the fax server
function is active and used during data exchanges
between the machine and the fax server.
To edit this setting:
1 Press MENU .
2 Select SETTINGS > COMMUNICATION >
SERVICES > SMTP SERVER .
3 To activate / deactivate this function, press
ACTIVATION . Select the required status and press
OK to confirm the new setting.
4 To modify the port number used, press PORT . En-
ter the number of the server port (from 1 to 65535)
using the virtual keyboard or the number pad. The
default port is
25 . Press OK to confirm the new set-
ting.
5 Press MENU to return to the home screen.
Active Directory configuration
1 Press MENU .
2 Select SETTINGS > COMMUNICATION >
SERVICES .
3 Press ACTIVE DIRECTORY .
4 Make the required adjustments.
5 Press MENU to return to the home screen.
Configuring the print server (RAW, LPR or
IPP)
Depending on your needs and on the architecture of your
print network, you can configure the machine on the
following print servers:
• RAW print server
• LPR print server
• IPP print server
To activate and configure the protocol used by the
machine on the print server:
1 Press MENU .
2 Select SETTINGS > COMMUNICATION >
SERVICES .
3 Press the required setting, RAW PRINT , LPR
PRINT or IPP PRINT .
4 To activate / deactivate the protocol selected,
press
ACTIVATION . Select the required status and
press OK to confirm the new setting.
5 To modify the port number used, press PORT . En-
ter the number of the server port (from 1 to 65535)
using the virtual keyboard or the number pad. The
default ports are 9100 for RAW, 515 for LPR and
631 for IPP. Press
OK to confirm the new setting.
6 Press MENU to return to the home screen.
Configuring the LDAP server
The LDAP server is used to access a directory server for
contacts or lists of contacts (maximum 500 recipients).
The LDAP function can only be activated if at least 50
free entries exist in the machine's local address book.
To activate and configure the LDAP function:
Accessing LDAP server configuration
1 Press MENU .
2 Select SETTINGS > COMMUNICATION >
SERVICES > LDAP SERVER .
> The first settings appear on the screen. Use
OTHER PARAMETERS to access all available
settings.
3 Press NETWORK POSITION .
4 Enter the IP address or the name of the LDAP serv-
er using the virtual keyboard or the keypad. Press
OK to confirm the new setting.
5 Press LOGIN .
6 Enter the login for the LDAP server using the virtual
keyboard. Press
OK to confirm the new setting.
7 Press PASSWORD .
8 Enter the password for the LDAP server using the
virtual keyboard. Press
OK to confirm the new set-
ting.
9 Press BASE DN .
10 Enter the database name using the virtual key-
board. Press
OK to confirm the new setting.
11 Press CONFIDENTIALITY .
12 Select the required encryption from the list. Press
OK to confirm the new setting.
13 Press AUTHENTICATION .
14 Select the required authentication method from the
list. Use the up and down arrows to view all availa-
ble options. Press
OK to confirm the new setting.
15 Press PORT .
16 Enter the number of the server port (from 1 to
65535) using the virtual keyboard or the number
pad. The default port is
389 ( 636 for a connection
with IMPLICIT encryption). Press OK to confirm the
new setting.
Notice
The LDAP server must be compatible with
LDAPv2 or earlier versions.