MF 6990dn - Agoris C935
- 85 -
12 -
PC Functions
Selecting the current peripheral
Only one peripheral can be connected at a time.
You can select the current peripheral by clicking on the
radio button corresponding to the peripheral.
Connection status
The status of the connection between the current
peripheral and the PC is indicated by a colour code.
The following table indicates the possible connections
statuses:
Peripheral parameters
1
Select a peripheral by clicking on the correspond-
ing line in the list and click on
Properties
to config-
ure the scanning settings to apply to this peripheral
when you use the
Scan to
function.
2
Select the required scan
mode
from the scroll
down list.
3
Select the required scan
resolution
from the scroll
down list.
Colour
Status
Yellow
Connection in progress.
Green
Connection established.
Red
The PC cannot connect to the
peripheral.
Check the connection between
the peripheral and the PC.
