LIFT MODEL VISION AS 300 Rev001
8-4
To operate the lift see the chapter of OPERATION
Load the elevator car making sure that:
• loads are compatible to the of use of the lift
• the load has been firmly secured and uniformly distributed in the
cabin
• the load has been firmly secured in the cabin
• after the operations of loading, the access doors must be
regularly closed
ATTENTION:
In case of an emergency, for which the immediate stop of the lift
were required, press the red STOP push-button fitted on the control
panel!
Rise with cabin to the desired floor then open the first door of the cabin and next the landing
door to access at the floor
NOTE: when the door is open, the elevator cannot be operated because the electric
limit switch prevents its starting.
When the height required is reached, carry out the operations of loading and unloading.
Close the sliding doors.
The elevator is free to move.
NOTE: Be sure not to carry out maneuvers of sudden reverses in order to avoid
useless stresses to the mechanical parts.
8.5
Disabling of the hoist
Lower the cabin to ground level.
disconnect the main cut-out switch fitted on the panel (turn into the "0" position).
remove the feeding cable.
adopt all the precautions to preclude the use of the elevator to unauthorised persons.
NOTE: In all these cases, when the use of the hoist is forbidden, at the end of the
working time and anyway, during the periods of non-use (with the structure
mounted), the elevator must necessarily be disabled following the
procedure here below.
8.6
Centrifugal parachute brake
ATTENTION:
The parachute brake is supplied by the manufacturer with its
protection sealed which for any reason must not be tampered!
Содержание VISION AS 300
