SAFI VISION AS 300, Руководство по установке, использованию и обслуживанию

Страница: 66 / 94

LIFT MODEL VISION AS 300 Rev001 10-9
By pressing the
rise/descent push-button
the elevator does not
move
The phases have been inverted Invert the phase by operating
on the plug fitted on the electric
panel
Total current failure Check and be sure that the
control electric panel is live
Some limit switches have tripped Inspect the following limit
switches:
a) rise limit switch
b) descent limit switch
c) door closing control limit
switch
d) vertical element presence
controlling limit switch
During the rise/descent
you
can hear hum
emitted by the electric
motors
Humidity in the safety system electro-magnet Operate repeatedly the
rise/descent lever. If the
problem persists replace the
electro-magnet.
When the push-button
during the descent is no
longer
pressed the
elevator does not stop
immediately and instead
the
emergency brake
gets activated)
The electro-magnetic brake of the electric
motor is worn or it has lost power Call immediately the closer
assistance point in your area or
the manufacturer
During the rise the
machine does not stop,
but instead, by pressing
the
descent lever
descends
The limit switch which controls the vertical element presence has been
activated. Set the limit switch
appropriately
Table 10 : Inconveniences to the electric installation
ATTENTION: All intervention on the electric installation must be carried out by
qualified personnel only obeying the safety rules over the electric
installations, in order to avoid accidents and injuries to the
operators!