LIFT MODEL VISION AS 300 Rev001
2-2
•
Fall or overturning of the elevator car
•
Excessive acceleration or
braking of the elevator car
•
Imprecise
signaling
2.2
Preventive measures and protection from risks
•
The erection and use of the lift must be assigned to
qualified
and trained personnel
only who must be informed of the specific risks.
•
Before the erection verify the
soil pressure
and provide for load distribution elements
in
each
case.
•
Follow all the indications given in the manual for the use and maintenance supplied
by the manufacturer.
•
Delimit the zone underneath the platform so to avoid the transiting or stopping of
people.
•
Delimit the zone underneath the lift so to avoid the transiting or stopping of people.
•
Check that the installation connections electrical to earth and of protection against
the
atmospherically
discharges have been made properly.
•
Paths and access zones must be accessed in safety and protected against the risk
of fall.
•
Check that the lift is
working
minimum 5m distance from electric cables and that
there are no hindrances to lift cage.
•
Check the safety devices.
•
Personnel must access the working deck with the safety harness hooked to fix parts
of the structure.
•
All the equipment parts must be protected
against
the corrosion.
•
The capacity load on top of the lift is equal to 300kg
•
Steadiness against the overturning of the equipment must be assured.
•
The maximum lifting speed of the hoist is 22 m/min.
•
Floorings must be kept antislip.
•
Safety parapets are 1.100 mm high not to be removed.
•
The electric equipment protection level corresponds to IP55, to be kept.
•
In case of cut in the electric energy supply, the lift must be taken back to
ground
level acting on the manual brake release.
•
It is necessary to take back the lift to the
ground
level when the wind blowing speed
is faster than
101,8 km/h. ??????
2.3
Personal safety equipment
•
Operators charged with the erection, dismantling and use of the lift must necessarily
use: helmet, gloves, safety boots without non-pierce able soles, safety harness to
access the working deck.
2.4
Accomplishment
•
Check periodically the lifting organs, bolts and anchorages, every three months to
be made by the user.
•
Lubricate and greasing of the lifting organs.
Содержание VISION AS 300
