English
31
8.5
Spiral adjustment
The spirals can be adjusted to obtain better dispensing of
the product selections.
Proceed in the following way to adjust the spirals (Fig.
46):
- pull the spiral until releasing its coupling from the motor
seat;
- turn the spiral by 45
°
at a time, until the required position
is reached;
- release the spiral, the coupling will automatically go
back to its seat.
45
°
Fig. 46
Fig. 49
- replace the spiral with another one, more suitable for
the product to dispense: insert the new spiral into the
motor feeding flange by reversing the order of the above
operations;
- adjust the spiral according to the instructions provided
in section 8.5.
- while holding the motor, turn the right-hand spiral
counter-clockwise, until it comes off its stop notch (Fig.
49). Turn the left-hand spirals clockwise.
-
remove the tray spiral and motor (Fig. 48);
All the spirals are interchangeable and can be mounted in
the vending machine trays in the following way:
- remove the tray from the vending machine and place it
on your work top (Fig. 47);
Fig. 47
8.6 Replacing the spirals
In the standard version, spirals with different pitches are
supplied, suitable for the dispensing of products with
different shapes and consistency. Other spirals can be
ordered directly from the Manufacturer.
Fig. 48