English
25
7.5
Maintenance menu
Maintenance Technician
This section describes how to set, modify or check the
vending machine maintenance parameters.
7.5.1 Access to the maintenance menus
Open the access door and disable the safety device (see
section 5.4) after obtaining the special key from the
Maintenance Technician.
Press the right-hand red button provided in the lower part
of the CPU card (Fig. 38), to obtain access to the
maintenance menus.
To quit the programming menus and return to normal
machine operation, proceed as follows:
- press the button shown in figure 39 once again;
- remove the key from the safety switch, in order to switch
the vending machine off;
- close the door and wait until the self-configuration
process has been completed.
Fig. 38
After pressing the programming key (Fig. 37), you will have to:
- enter your password (if different from “00000”);
- keep pressing the key
until the SYSTEM MANAGEMENT
menu is opened;
- press the key
, to obtain access to the V.M. CODE item and
set the required values (from 01 to 25).
- press the key
for access to the TEMPERATURE item;
- set the temperature value (12) using the numeric keys;
- press the key
to enter;
- quit programming with the keys
and
.
SALES
MANAGEMENT
LANGUAGE
ENGLISH
Example of TEMPERATURE setting
SYSTEM
MANAGEMENT
V.M. CODE
>0000<
TEMPERATURE
>12<
FREE VEND
NEVER
PAYMENT
SYSTEMS
INSERT PASSWORD
<13753>
