English
12
In the can and bottle trays, guides are mounted to facilita-
te bottle and can feeding during the dispensing phase (Fig.
23).
Fig. 23
Sliding guide
Fig. 24
Fig. 25
Guide di scorrimento
Important
The tray and spiral arrangement supplied with the standard
version of the vending machine represents, in the
Manufacturer’s opinion, an ideal design to supply different
types of product. However, other types of spiral are
available on request, which can be used to dispense any
type of product.
Additionally, it is possible to install up to 7 trays on the
BP
56
vending machine, complete with their special spirals.
4.3
Spiral motor and tray
connection
On the right side of the trays are 7 connectors (6 on
BP
36
) which can be used for as many trays.
The tray arrangement and tray connection to their special
connectors determine the selection number of the product
to be dispensed.
The diagram of figure 26 shows the vending machine
division into cells at the crossing points between rows
(corresponding to the number of
connectors
, top-down
: 1-2-3-4-5-6-7) and columns (corresponding to the
positions of the
spirals
in the tray, left to right: 1-2-3-4-
5-6-7-8).
Snack trays can have either single spirals (Fig. 24) or
double spirals (Fig. 25), controlled by a single motor.
Important
In the event of a single motor powering two spirals, the
spirals (one on the right side, one on the left side) must
have the same pitch. To help product feeding, a sliding
guide must be inserted under each spiral (Fig. 25).
Fig. 26
only
BP 56
