English
15
4.5
Connection to the serial
port
Maintenance Technician
This operation should be carried out by the
Maintenance
Technician.
Via the serial port, your vending machine can be connected
to a Personal Computer or the equipment supplied by our
AUTHORIZED CUSTOMER SERVICE centers, to carry out
checks and programming operations.
4.6
Installation of payment
systems
The vending machine
BP 56/BP 36
is pre-set for the
installation of a number of payment systems, i.e.:
- 12/24V DC parallel banknote reader;
- MDB;
- executive and BDV;
- Saeco card;
- 24V DC parallel coiner;
- 12V DC parallel coiner;
- 12V DC token box.
Important
The vending machine is delivered without any installed
payment system, the installers will have to install the
required payment system.
After installing your required payment system, the
programming menu must be adjusted, by setting the
parameters corresponding to your selected payment system
(see Chapter 7).
Warning
The Manufacturer shall not be held responsible for any
damages to the vending machine, persons and/or property
resulting from wrong installation of the payment system.
The installers shall be responsible for the payment system
installation.
4.7
Electric connection
The vending machine is supplied with a power cord to be
plugged into the socket provided in the back side (Fig.
32).
Warning
Make sure that the mains voltage corresponds to the rated
voltage shown in the data plate.
Fig. 32
Maintenance Technician
The
Maintenance Technician is responsible for your vending
machine installation and will therefore have to make sure
that the power supply system is in compliance with the
safety regulations in force.
If in doubt, do not continue the installation and ask qualified
and skilled personnel to carry out a complete check on
your machine wiring system.
Also make sure that the electric network to which your
vending machine is connected has suitable specifications
for the maximum load required by the machine and
indicated in the data plate.
Do not use adapters nor multi-sockets (Fig. 33).
Important
Make sure that the electrical plug is easily accessible even
after installing the machine.
