Sabiana TITAN Скачать руководство пользователя страница 23

Страница: 23 / 44

TITAN

manuale di installazione, conduzione e manutenzione

Installation and maintenance manual

Destination of use and generalities

The

TITAN

units are designed for the

air treatment in the air conditioning systems

and they consist of equipment dimensioned in

function of the specific needs of the system which they are intended for. Their only serial element is the construction system, while their
technical performance characteristics are customized and specified in the annexed documents such as specification data sheets, layouts,
electric diagrams, etc. that are their integrating parts.

SABIANA

bears neither responsibilities nor bounds, of any kind, for any use different from the one specified above.

Particular attention shall be paid when choosing the installation place of the

TITAN

Air Handling Unit (hereunder called also UTA) and the

atmosphere in which it is installed must not be explosive or corrosive for the materials which build up the unit.

The careful reading of this manual permits to carry out the correct installation, precise setup and effective maintenance. together with its
annexes, the manual shall be kept with care and made available for every reference.

All the installation, test and servicing operations must be carried out by qualified personnel, that is technically trained and competent.

Any tampering or electrical or mechanical change, which are not previously agreed upon and authorized, cancel the Warranty of the unit.

Always observe the safety standards in force on the installation place and the provisions set by the Operative Management of the site.

Before  starting  up  the  equipment  check  that  the
characteristics  of  the  power  supply  lines  comply  with  the
rated  values  indicted  on  the  labels  positioned  next  to  any
power  equipment  (e.g.:  fan  motors,  electric  heating
resistances, etc.).

In  case  of  failure  or  maintenance,  the  power  supply
equipment  must  be  always  switched  off.  Moreover,  for  any
replacement  of  components  which  should  be  carried  out,
always  apply  to

our main office

or an

Authorized

Servicing Center of

SABIANA

that makes use of

original spare parts

The dismissed packing material (plastic, wood, polystyrene,
polyurethane, cardboard, staples, nails, etc.) must be kept
out of the reach of children for it might be dangerous for
their health and it must be disposed of or recycled correctly in
compliance with the local standards in force.

SABIANA

disclaims any responsibility for any damage to

people or thing that might come, either directly or indirectly,
from the disregard of these instructions.

Standards and certifications

The

TITAN

air handling units are manufactured in

the full compliance with Standard:

UNI EN 1886

- June

2000 -

Mechanical performance

and classified according to Standard:

UNI EN 13053

- September 2007

classifications and performances for units,
components and sections

with certificate issued by

Authorized Body, certifying the characteristics shown in the
table

SABIANA

is certified according to

UNI EN ISO 9001

since

1996

All the

SABIANA

products are provided with the

mark,

for they are manufactured in compliance with the Directives
of the European Union and relevant National Laws; therefore
each one of them comes complete with the relevant

"statement of conformity"

• casing strength

• casing air leakage at -400 Pa

• casing air leakage at +700 Pa

• filter bypass leakage (at + and - 400 Pa)

G1 - F9

• thermal transmittance

• thermal bridging factor

TB3

dB 13,4
dB 16,5
dB 14,6
dB 13,4
dB 15,9
dB 26,3
dB 32,8

125
250
500

1K
2K
4K
8K