Runco D-73d Ultra, Руководство по установке и эксплуатации

Страница: 87 / 152

Operation
D-73d Series Installation/Operation Manual 71
Picture Use the controls in the Picture Menu to calibrate each Dimension Digital Controller
input to achieve optimum picture quality.
The Dimension Digital Controller has been designed to incorporate setup and
calibration standards established by the Imaging Science Foundation (ISF). The ISF
has developed carefully crafted, industry-recognized standards for optimal video
performance and has implemented a training program for technicians and installers to
use these standards to obtain optimal picture quality from Runco video display devices.
Accordingly, Runco recommends that setup and calibration be performed by an ISF
certified installation technician.
All signal types require separate processing. Therefore, you need to calibrate each
Dimension Digital Controller input separately.
Although it may be possible to obtain satisfactory picture quality using the naked eye
and regular program material, Runco recommends using an external test pattern
source (Ovation Multimedia, Digital Video Essentials or AVIA test DVD or equivalent)
for best results.
Connect your test pattern source to the input that you are calibrating and proceed as
follows.
Perform the adjustments in the order listed here.
Picture
Brightness
Contrast
Color
Tint
Sharpness
Noise Filter
1. When you change a picture quality setting, save the change to
a preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input and display mode separately.) For information about
saving settings, refer to
Memory Presets on page 78.
2. For best results, Runco recommends that you set
ConstantContrast to Off before adjusting Brightness, Contrast
and other image quality settings in this menu (refer to
ConstantContrast on page 85). After you have completed the
initial calibration, set ConstantContrast to On if desired.
Note