Runco D-73d Ultra, Руководство по установке и эксплуатации

Страница: 104 / 152

Operation
88 D-73d Series Installation/Operation Manual
Splash Configure: Use the Splash Configure menu to control the appearance and
behavior of the “splash” screen that appears on the display upon power-up.
• Owner Name/ISF Calibrated/ISF Other: You can have the D-73d display the
owner’s name, your name, the phrase “ISF Calibrated” and/or any other string, up to
30 characters in length.
Use the up or down cursor button to select a character. Use the right and left cursor
buttons to change the cursor position. Press
MENU when you have finished entering
text.
• Splash Timer: When you turn on the D-73d, it projects a welcome screen with the
Runco and ISF logos, along with the personalized information you enter as
described above. Select Splash Timer from the Splash Configure menu to set the
amount of time for which this screen appears. The range is from 5 to 60 seconds, in
one-second increments. Press or to set the timer, then press
MENU .
• Splash Enable: When you have finished customizing the splash screen, select
Splash Enable from the Splash Configure menu. Then, select On and press ENTER .
OSD Position: To adjust the position of the OSD, select OSD Position from the
Calibration menu and press ENTER .
Press or to select “Hor.” or “Ver.” Then, press or to change the position.
Service Use the Service menu to access advanced projector configuration settings. This menu
should be used by ISF-certified technicians only.
Test Video: Select Test Video from the Service Menu to access the internal test
patterns on the Dimension Digital Controller. Table 4-4 lists the available test patterns
and describes their suggested usage.
Service
Test Video
Input Names
Display Device
Network
Color Space
Triggers
Miscellaneous
Sync Threshold
HDMI
Front Panel Brightness
Auto Power Off
Standby Mode
System Reset
➤
You must enter a passcode to access the Service menu.
Table 4-4. Test Patterns and Their Suggested Usage
Pattern Suggested Usage
Color Bars 1
Use this pattern when making
color saturation and tint
adjustments.
Color Bars 2
Use this pattern when making
color saturation and tint
adjustments.
Note