Runco D-73d Ultra, Руководство по установке и эксплуатации

Страница: 95 / 152

Operation
D-73d Series Installation/Operation Manual 79
To reset the Custom 1 or Custom 2 memory preset to its factory-default state, select it,
press
or to highlight Reset and press ENTER .
3D Processing Select 3D Processing from the Main Menu to set the following options related to
formatting and delivery of HDMI 3D content.
3D Mode: Select 3D Mode from the 3D Processing menu to specify how the Dimension
Digital Controller processes the “left eye” and “right eye” image components
respectively.
• Choose
Auto to have the D-73d determine the appropriate 3D mode based on the
HDMI vendor-specific InfoFrame data. This is the default setting.
• Choose Off for 2D content.
• Choose Side-by-Side to have the
Dimension Digital Controller scale the left
and right image halves respectively to fill
the screen.
Side-by-Side multiplexing is used with
1080i source material.
• Choose Top-and-Bottom to have the
Dimension Digital Controller scale the top
and bottom image halves respectively to fill
the screen.
Top-and-Bottom multiplexing is used with
720p or 1080p source material.
• Choose Frame Packing to have the Dimension Digital Controller decode frame
packed data into left and right eye data.
Reverse Eyes: By default, the Primary and Secondary video scalers in the Dimension
Digital Controller are dedicated to “left eye” and “right eye” image processing
respectively. To reverse this relationship, choose Reverse Eyes from the 3D
Processing menu and set it to
On .
Sleep Timer Select Sleep Timer from the Main Menu to turn off the D-73d after a specified interval.
Press or to select Off, 30 Minutes, 60 Minutes, 90 Minutes, 2 Hours or 4 Hours.
Then, press
ENTER.
3D Processing
3D Mode
Reverse Eyes
Sleep Timer

Off
30 Minutes
60 Minutes
90 Minutes
2 Hours
4 Hours