Runco D-73d Ultra, Руководство по установке и эксплуатации

Страница: 90 / 152

Operation
74 D-73d Series Installation/Operation Manual
11.Adjust the color saturation level until the outermost (gray and blue) color bars
appear to be a single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the
image. When tint is decreased, the image appears redder; when it is increased the
image appears greener.
To adjust the tint, enable “blue only” display mode in the Diagnostics menu, as you
would for adjusting color saturation (refer to the previous section,
Color Saturation ).
Select Tint from the Picture menu and press ENTER . Adjust the tint level until the cyan
and magenta color bars (on either side of the green bar) appear to be a single shade of
blue.
Like the brightness and contrast controls, the color and tint
controls are interactive. A change to one may require a subtle
change to the other in order to achieve the optimum setting.
gray
yellow
cyan
gr
een
magenta
re
d
blue
Note