Configuration Guide
NFPP Configuration
To restore the monitored time to the default value, use the
no arp-guard
monitor-period
command in the nfpp configuration mode.
Caution
If the isolated time is 0, the serviceview monitor will be perform to
monitor the detected attacker, and the timeout time will be the
monitored period. In the process of the serviceview monitor, if the
isolated time is but not 0, the hardware isolation will be performed
to isolate the attacker, and the timeout time will be the isolated
period. Only be the monitored period valid when the isolated
period is 0.
Modifying the isolated time from non-0 to 0 removes the attackers
from the interface rather than performs the serviceview monitor.
Configuring the monitored host limit
Command
Function
Ruijie#
configure terminal
Enter the global configuration mode.
Ruijie(config)#
nfpp
Enter the nfpp configuration mode.
Ruijie(config-nfpp)#
arp-guard
monitored-host-limit
seconds
Configure the monitored host limit,
ranging 1-4294967295. The default
value is1000.
Ruijie(config-nfpp)#
end
Return to the privileged EXEC mode.
Ruijie#
show nfpp arp-guard summary
Show
the
arp-guard
parameter
settings.
Ruijie#
copy running-config
startup-config
Save the configurations.
To restore the monitored host limit to the default value, use the
no arp-guard
monitored-host-limit
command in the nfpp configuration mode.
If the monitored host number has reached the default 1000, and the administrator sets
the monitored host limit smaller than 1000, the existent moniored hosts will not be
deleted and it will prompt the message
“
%ERROR
:
The value that you configured is
smaller than current monitored hosts 1000
,
please clear a part of monitored hosts.”
to notify the administrator of the invalid configuration and removing a part of the
monitored hosts.
Caution
It prompts the message that
“% NFPP_ARP_GUARD
-4-SESSION_LIMIT:
Attempt to exceed limit of 1000 monitored hosts.”
if the monitored
host table is full.
Содержание RG-S2900G-E Series
