Ruijie RG-S2900G-E Series, Руководство по настройке

Страница: 145 / 943

Configuration Guide Interface Configuration
Configuring and Using Macro Definition for Interface Range
You can define a macro instead of inputting port ranges. However, you have to define macros
using the define interface-range command in the global configuration mode before using the
macro keyword of the interface range command.
Command Function
Ruijie(config)# define
interface-range macro_name
interface-range
Define a macro for interface range.
Name of the macro, up to 32 characters.
A macro can define multiple interface
ranges.
The interfaces in all ranges in the same
macro must be of the same type.
Ruijie(config)# interface range
macro macro_name
The string defined by the macro will be
saved in the memory. When you use the
interface range command, you can use the
macro name to replace the interface-range
string.
To delete a macro, use the no define interface-range macro_name command in the global
configuration mode.
When defining an interface range using the define interface-range command, you should pay
attention to the range format.
A valid range format is:
–
vlan vlan-ID - vlan-ID , with VLAN ID in the range of 1 to 4094;
–
fastethernet slot /{ the first port } - { the last port };
–
gigabitethernet slot /{ the first port } - { the last port };
–
Aggregate Port Aggregate port number , with Aggregate port number in the range of 1 to
MAX.
Interfaces contained in an i nterface range must be of the same type, that is, they should be all
switch ports, aggregate ports or SVIs.
This example defines a macro for fastethernet1/1-4 by using the define interface-range
command:
Ruijie# configure terminal
Ruijie(config)# define interface-range resource
fastethernet 1/1-4
Ruijie(config)# end
This example defines a macro for multiple ranges:
Ruijie# configure terminal
Ruijie(config)# define interface-range ports1to2N5to7
fastethernet 1/1-2, 1/5-7
Ruijie(config)# end