Ruijie RG-S2900G-E Series, Руководство по настройке

Страница: 6 / 943

Configuration Guide Command Line Interface Configuration
Command Line Interface Configuration
This chapter describes the method to use the command line interface(CLI). You can manage
network devices by the command line interface.
This chapter covers the following topics:

Command Mode

Getting Help

Abbreviating Commands

Using no and default Options

Understanding CLI Error Messages

Using History Commands

Using Editing Features

Filtering and Looking Up CLI Output Information

Using Command Alias

Accessing CLI
Command Mode
The management interface of Ruijie network devices falls into multiple modes. The command
mode you are working with determines the commands you can use.
To list the usable commands in each mode, enter a question mark (?) at the command prompt.
After setting up a session connection to the network device management interface, you enter in
the user EXEC mode first. In the user EXEC mode, only a few commands are usable with
limited functions, for example, command show . The command results are also not saved.
To use all commands, enter the privileged EXEC mode with the privileged password. Then you
can use all privileged commands and enter the global configuration mode.
Using commands in a configuration mode (for instance, global configuration or interface
configuration) will influence the current configuration. If you have saved the configuration
information, these commands will be saved and executed when the system restarts. To enter
any of the configuration modes, first enter the global configuration mode.
The following table lists the command modes, access methods, prompts, and exit methods.
Suppose the equipment is named " Ruijie " by default.
Summary of main command modes:
Command
mode
Access
method
Prompt Exit or enter the next mode Remark