Ruijie RG-S2900G-E Series, Руководство по настройке

Страница: 518 / 943

Configuration Guide 802.1x Configuration
Configuring 802.1x Accounting
Our 802.1x has implemented the accounting function. Accounting is based on interval. In other words, the 802.1x records
the length of the period between the first successful authentication of the user an
d the user’s logoff or when the switch
detects user disconnection.
After the first successful user authentication, the switch sends an accounting start request to the server. When the user
gets off-line or the switch finds that the user has got off line or when the physical connection of the user is broken, the
switch sends an accounting end request to the server. The server group records this information in the database of the
server group. Based on such information, the NMS can provide the basis for accounting.
Our 802.1x stresses the reliability of accounting, and it specially supports the backup accounting server to avoid failures of
the accounting server. When a server can no longer provide the accounting service due to various reasons, the switch will
automatically forward the accounting information to another backup server. This greatly improves the reliability of
accounting.
When a user exits by itself, the accounting duration is accurate. When the connection of the user is broken by accident,
the accounting accuracy depends on the re-authentication interval (the switch detects the disconnection of a user by using
the re-authentication mechanism).
To enable the accounting function of the device, the following settings are necessary on the device:

On the Radius Server, register the switch as a Radius Client, like the authentication operation.

Set the IP address of the accounting server.

Set the accounting UDP port.

Enable the accounting service on the precondition that the 802.1x has been enabled.
In the privileged EXEC mode, you can set the accounting service by performing the following steps:
Command Function
Ruijie(config)# aaa new - model Enable the AAA function
Ruijie(config)# aaa group server radius gs Configure the accounting server group.
Ruijie(config-gs-radius)# server address acct - port port-id Add a server to the server group.
aaa accounting network acct start-stop group gs
Configure the accounting method list.
Ruijie(config-gs-radius)# dot1x accounting acct Apply the accounting method list for the 802.1X.
Ruijie# show running-config Show the configuration.
The no aaa accounting network command deletes the accounting method list. The no dot1x accounting command
restores the default dot1x accounting method. The following example sets the IP address of the accounting server to
192.1.1.1, that of the backup accounting server to 192.1.1.2, and the UDP port of the accounting server to 1200, and
enables 802.1x accounting:
Ruijie# configure terminal
Ruijie(config)# aaa new-model
Ruijie(config)# aaa group server radius acct-use
Ruijie(config-gs-radius)# server 192.168.4.12 acct-port 1200
Ruijie(config-gs-radius)# server 192.168.4.13 acct-port 1200
Ruijie(config-gs-radius)# exit
Ruijie(config)# aaa accounting network acct-list start-stop group acct-use