Ruijie RG-S2900G-E Series Скачать руководство пользователя страница 140

Страница: 140 / 943

Configuration Guide

Interface Configuration

An access port handles tagged frames in the following ways:



When the VID (VLAN ID) of the tag is the same as the default VLAN ID, the access port

receives the frame and removes the tag before sending it out.



When the VID (VLAN ID) of the tag is 0, the access port receives the frame. In the tag,

VID=0 is used to prioritize the frame.



When the VID (VLAN ID) of the tag is different from the default VLAN ID and is not 0, this

frame is discarded.

Trunk Port

A trunk port can belong to multiple VLANs that receives and sends frames belonging to multiple

VLANs. Generally, it is used to connect devices or computers.

Default VLAN

Because a trunk port can belong to multiple VLANs, you need to set a native VLAN as the

default VLAN. By default, the trunk port transmits the frames of all VLANs. In order to reduce

device load and minimize waste of bandwidth, you can set a VLAN allowance list to specify the

frames of which VLANs the trunk port can transmit.

Caution

It is recommended to set the native VLAN of the trunk port on the

local device to be consistent with that of the trunk port on the

remote device. Otherwise, the trunk port cannot forward packets

properly.

Receiving and sending frames

The trunk port can receive untagged frames and the tagged frames of the VLANs permitted by

the port. All the frames of non-native VLANs sent by the trunk port are tagged, and the frames

of native VLAN are untagged.

Untagged frame

If a trunk port receives a frame without IEEE802.1Q TAG, this frame will be transmitted in the

native VLAN of the port.

Tagged frame

If a trunk port receives a tagged frame, it handles the frame in the following ways:



When the trunk port receives a tagged frame whose VID is the same as that of its native

VLAN, this frame is accepted. The tag will be removed before it sends the frame.



When the trunk port receives a tagged frame whose VID is different from that of its native

VLAN but is permitted by the port, the frame is accepted. The tag is kept unchanged when

it sends the frame.



When the trunk port receives a tagged frame whose VID is different from that of its native

VLAN and is not permitted by the port, the frame is discarded.

Содержание RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RG-S2900G-E Series

Отзывы:

Похожие инструкции для RG-S2900G-E Series

Бренды по названию

Популярные бренды

Ruijie RG-S2900G-E Series, Руководство по настройке

Результаты поиска

Содержание RG-S2900G-E Series

Отзывы:

Похожие инструкции для RG-S2900G-E Series

Бренды по названию

Популярные бренды