RTW SurroundMonitor 11900 Series, Руководство пользователя, Страница: 313 / 376

EN-123 9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings
EN
SurroundMonitor 11900 Series
• Standard Settings Analog
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This combo box applies to the parameters below it.
After selecting one of the standards listed below, the
first two boxes are automatically set to the values corre-
sponding to the selected standard. After editing any of
these combo boxes manually, the text “Non Standard” is
displayed in the Standard Settings Analog combo box.
Reselecting one of the standards automatically resets the
combo boxes to the values corresponding to the selected
standard.
The following analog standards are available:
• DIN
• Nordic
• British IIa
• British IIb
• VU
• SMPTE
• NHK
• Non Standard
NOTE - The Standards Settings analog combo
box and the related parameters are only available after a
analog signal source has been selected in the
Metering
Routing
section of the
Key 1
to
Key 7
menu pages.
NOTE -
The
SMPTe
option is only available after
SMPTE/RP155 (+24 dBu)
was selected as
Reference
Level Standard in the Reference Levels menu.
• Scale
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This combo box allows you to select the scale you want
to use:
• Din5dB (–50 dB to +5 dB, 0 dB display is referred to
+6 dBu, DIN standard setting)
•
DIN 10 dB
(–50 dB to +10 dB, 0 dB is +6 dBu)
•
nordic
(–42 dB to +12 dB, 6 dB is +6 dBu, Nordic
standard setting)
•
British IIa
(„1“ to „7“, „6“ is +8 dBu, British IIa stan-
dard setting)
•
British IIb
(„–12“ to „+12“, „8“ is +8 dBu, British IIb
or SMPTE standard setting)
•
VU
(–20 dB to +3 dB, 0 dB is +6 dBu, VU standard
setting)
•
Zoom +/–10dB
(–10 dB to +10 dB, 0 dB is +6 dBu)
• Zoom +/–1dB (–1 dB to + 1 dB, 0 dB is +6 dBu)
•
SMPTE24dB–abs
(–35 dB to +24 dB, 0 dB is 0 dBu)
Only available when SMPTE/RP155 (+24 dBu) is
selected as
Reference Level Standard
in the
Refe-
rence Levels
menu.
•
SMPTE20dB–rel
(–40 to +20 dB, 0 dB is +4 dBu)
Only available when SMPTE/RP155 (+24 dBu) is
selected as
Reference Level Standard
in the
Refe-
rence Levels
menu. The reference level for the 0 dB
display is +4 dBu.
• nHK
Only available when
SMPTE/RP155 (+24 dBu)
or
User (+18 ... +24 dBu)
is selected as
Reference
Level Standard
in the
Reference Levels
menu.
The reference level for the 0 dB display refers to the
selected standard resp. to the individual selected re-
ference level with the User list box in the
Reference
Levels
menu (see Chapter 6.7).
• Integration time
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This combo box sets the integration time for the level
display:
• 10 ms (
Standard Settings analog
: selection
din
,
nordic or SMPTe )
• 20 ms (
Standard Settings analog
: selection
British IIa
or
British IIb
)
• 1 ms
• 0.1 ms
• 300 ms (
Standard Settings analog
: selection
VU
)
• PH Integration Time
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This combo box sets the integration time for the peak hold
display:
• Integration Time: Uses the same integration time as
for the level display. This applies for
all standard settings.
• Sample: Uses a sample-precise integration
time that is independent of the
level display.
• Headroom
(Is ONLY available with NHK scale selected and does
NOT apply for Peakmeter – Channel Group 3 in Surround
modes and 2 Channel Stereo mode)
This list box sets the beginning of the headroom in the
range between –20 dBFS and –5 dBFS. The standard
setting is
–9 dBFS
.