RTW SurroundMonitor 11900 Series, Руководство пользователя, Страница: 312 / 376

9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings EN-122 SurroundMonitor 11900 Series
• Standard Settings Digital
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This combo box applies to the parameters grouped direct-
ly below it.
After selecting
digital or aRd , these combo boxes are
automatically set to values corresponding to the
digital
or
aRd
standards. After editing any of these combo boxes
manually (except the
PH integration time
combo box
and the Operation indicator area combo box), the text
„Non Standard“ is displayed in the
Standard Settings
digital
combo box. Reselecting
digital
or
aRd
automati-
cally resets all parameters grouped below to the standard
values of these presets.
NOTE -
The
Standards Settings digital
combo
box and the related parameters are only available after a
digital signal source has been selected in the
Metering
Routing
section of the
Key 1
to
Key 7
menu pages.
NOTE -
Depending on the selected standard, so-
me of the parameters might not be available.
• Scale
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
The following scales are available in this combo box:
•
Dig60dB
(–60 dBFS to 0 dBFS,
Standard Settings
digital
: selection:
digital
)
•
Dig20dB
(–20 dBFS to 0 dBFS)
• Dig+18 dB... 0 dB (0 dBFS = +18 dB)
•
Dig+18 dB... 0... –18 dB
(0 dBFS = +18 dB)
•
Dig+20 dB... 0... –40 dB
(0 dBFS = +20 dB)
•
ARD +9 dB... –60 dB
(0 dBFS = +9 dB,
Standard
Settings digital : selection aRd )
•
<q> DIN 5 dB
(quasi-DIN scale,
–9 dBFS = 0 dB)
•
<q> DIN 10 dB
(quasi-DIN scale,
–9 dBFS = 0 dB)
•
<q> ARD +9 dB... –60 dB
(quasi-DIN scale,
0 dBFS = +9 dB)
•
<q> Zoom +/– 10 dB
(quasi-DIN scale,
–9 dBFS = 0 dB)
•
<q> Zoom +/– 1 dB
(quasi-DIN scale,
–9 dBFS = 0 dB)
•
<q> Nordic
(quasi-Nordic scale,
–9 dBFS = +6 dB)
•
<q> British IIa
(quasi-British scale,
–9 dBFS = “6”)
•
<q> British IIb
(quasi-British scale,
–9 dBFS = +8 dB)
• Integration time
(Does NOT apply for Peakmeter – Channel Group 3)
This combo box selects the integration time of the level
display:
• 10 ms (Standard Settings Digital: Selection ARD)
• 20 ms
• 1 ms
• 0.1 ms
• Sample (Standard Settings Digital: Selection Digital)
• PH Integration Time
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This combo box sets the integration time for the peak hold
display:
• Integration Time: Uses the same integration time
as for the level display (Standard
Settings Digital).
• Sample: Uses a sample-precise integration
time that is independent of the
level display.
• DC-Filter
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This combo box sets the DC filter. It can be switched
off
or set to
5 Hz
(Standard Settings Digital),
10 Hz
or
20 Hz
.
• Headroom
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This list box sets the beginning of the headroom in the
range between –20 dBFS and –5 dBFS. The digital stan-
dard setting (Standard Settings Digital) is
–9 dBFS
.
NOTE -
The headroom of the
ARD+9 dB..–60
dB
scale is fixed to
–9 dBFS
.
• Operation indicator area
(Does NOT apply for Peakmeter – Channel Group 3 in
Surround modes and 2 Channel Stereo mode)
This list box defines the threshold for the operating area in-
dicator. Values between –20 dB and 0 dB are available. The
digital standard setting (Standard Settings Digital) is 0 dB.