RTW SurroundMonitor 11900 Series, Руководство пользователя, Страница: 311 / 376

EN-121 9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings
EN
SurroundMonitor 11900 Series
These menu pages can be used to individually configure the
peakmeter display for each channel group. They contain set-
tings for the operating modes, standard settings for the digital
and analog signal paths, VU Lead and display colors for indi-
• Mode Selected
(Text field oes NOT apply for all Channel Groups, see fol-
lowing description)
• Surround modes
•
In
Peakmeter – Channel Group 1
, this field
shows the channel mode selected for the Sub
Preset you are working on. To edit the channel
mode, close the
Peakmeter – Channel Group
menu and the
Peakmeter Settings
menu and
select a new Mode setting.
• In
Peakmeter – Channel Group 3
, this field
shows the mode assigned to this channel group,
i. e.
SPl
.
• In Lext/Rext – Channel Group , this field shows
the mode assigned to this channel group, i. e.
lext/Rext
(only available with 3.1 and 5.1 sur-
round formats).
• In Downmix – Channel Group , this field shows
the mode assigned to this channel group, i. e.
lo/Ro
.
• Multi Channel mode
•
If
8 cH
or
4 cH
was selected to be the
chan-
nels
setting in the
Metering Routing
section
(
Peakmeter – Channel Group 1
), this field
shows the channel mode selected for the Sub
Preset you are working on. To edit the channel
mode, close the
Peakmeter – Channel Group
menu page and the
Peakmeter Settings
menu
and select a new Mode setting.
• 2 Channel Stereo mode
•
In
Peakmeter – Channel Group 1
, this field
shows the channel mode selected for the Sub
Preset you are working on. To edit the channel
mode, close the Peakmeter – Channel Group
menu page and the
Peakmeter Settings
menu
and select a new Mode setting.
•
Peakmeter – Channel Group 2
is not available.
• In
Peakmeter – Channel Group 3
, this field
shows the mode assigned to this channel group,
i. e.
SPl .
• Mode Select
(Combo box does ONLY apply for some Channel Groups,
see following description)
• Surround modes
This combo box is used to select the display mode
for
Peakmeter – Channel Group 2 . The available
options are the downmix signals either generated
from the surround format (
lo/Ro
) set with the
Mode
parameter or input from an external source (
lext/
Rext ). For both signals, the downmix parameters can
be displayed as well, with separate bargraphs for sum
and difference (
Lo/Ro + Sum/Diff
and
lext/Rext
+ Sum/Diff
).
• Multi Channel mode
When
2 cH
is selected for each group‘s Channels
settings in the
Metering Routing
section, these com-
bo boxes are used to select the display mode for the
Peakmeter – Channel Groups
1 to 4. The available
options are either the solely channel pairs (2 chan-
nels or Stereo) or the channel pairs with additional
displays of sum and difference in separate bargraphs.
The available signals for display are
2 cH
or
2 cH +
Sum/Diff
resp.
2 CH SpCor
or
2 cH +
Sum/Diff + SpCor
.
• 2 Channel Stereo mode
In
2 channel Stereo
mode, there are no combo
boxes in the available channel groups. The selected
mode is displayed.
NOTE -
Stereo channel pairs are defined and
marked with a spot correlator ( SpCor ) between the
corresponding bargraphs.
vidual display elements. With some exceptions, they apply to
all channel groups. The individual exceptions are all explained
explicitly where applicable.