RTW SurroundMonitor 11900 Series, Руководство пользователя, Страница: 207 / 376

EN-17 SurroundMonitor 11900 4 | Connection | 4.2 | Pin Assignment
Pin Assignment (continued)
GP IO (General-purpose Input/Output) (25-pin Sub-D-F)
Pin: Function:
1 IN Function key 1
2 IN Function key 2
3 IN Function key 3
4 IN Function key 4
5 IN Function key 5
6 IN Function key 6
7 IN Function key 7
8 IN Control key MODE
9 IN Control key MENU
10 IN Control key MORE
11 IN Control key INSTR(UMENT)
12 IN Select key SEL(ECT)
13 IN Control key Input
14 IN Control key DIM
15 IN Control key Output
16 IN Control key Mute
17 OUT Output 1
18 OUT Output 2
19 OUT Output 3
20 OUT Output 4
21 OUT Output 5
22 OUT Output 6
23 OUT Output 7
24 OUT Output 8
25 Common potential and shield/chassis
NOTE -
The pins each have to be switched to pin 25 for
activating the corresponding function. All GP IO inputs are active
low. All GP IO are set to active low by factory, but logic state and
switching function can be changed. Refer to paragraph
external
control via GP IO connector included in the PDF version of the
operating manual for more detailed information.
HD/sD sDI In Through
(BNC-F; S, SD versions only)
(External view of
the connector)
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
(External view of the
connector)
Ref sync In (25-pin Sub-D-F)
Pin: Function:
1 Ref Sync In (AES3), (+, hot)
14 Ref Sync In (AES3), (–, cold)
2
Shield/chassis
15 don‘t wire, for future use
3
don‘t wire, for future use
16 Shield/chassis
4
don‘t wire, for future use
17 don‘t wire, for future use
5
Shield/chassis
18 don‘t wire, for future use
6
don‘t wire, for future use
19 Shield/chassis
7
don‘t wire, for future use
20 don‘t wire, for future use
8
Shield/chassis
21 don‘t wire, for future use
9
don‘t wire, for future use
22 Shield/chassis
10 don‘t wire, for future use
23 don‘t wire, for future use
11 Shield/chassis
24 don‘t wire, for future use
12 don‘t wire, for future use
25 Shield/chassis
note: The AES3 Sync Input is permanently terminated with 110
Ω
.
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � �
� � � � � �
� � � � � �
� � � � � �
� � � � � �
(External view of the
connector)
Pin: Function:
Pin: Signal
Ring: Shield/chassis
nOTe - Input signals are active
looped through without processing.
Block diagram of the HD/sD sDI interface
© 09/2011 | Technical changes without prior notice.