RTW SurroundMonitor 11900 Series, Руководство пользователя, Страница: 219 / 376

EN-29 6 | First Use | 6.10 | Defining the Power On Preset
EN
SurroundMonitor 11900 Series
6.10 | Defining the Power On Preset
4. For saving your settings and leaving the menu system
press the
Save & Exit
key. The screen shows the
Save
Global Settings?
page.
5. Confirm saving the global settings by again pressing the
Save & Exit
key. The unit stores the settings and returns
to normal operation mode.
6. For aborting your settings and leaving the menu system
without any changes repeatedly press the
Abort
key until
the unit returns to normal operation mode.
The SurroundMonitor units can be configured to load a predefined preset after power on or to reuse the last preset that was
active before power down.
Please proceed as follows:
1. From normal display operation, press the Menu key.
Accessing the menu for the first time after power on will
take some seconds for initialization.
2. Normally, the instrument Settings menu tab with the
instrument Settings
menu is shown first. Use the cursor
keys < and > to select the
general Settings
menu tab.
The
Global General Settings
menu page is shown.
3. Use the
Power-On State
combo box to select the preset
that you want to be loaded after power on. Alternatively,
you can select the option
Use power off state
if you
want the unit to come up with the last used preset.