RTW SurroundMonitor 11900 Series, Руководство пользователя, Страница: 297 / 376

EN-107 9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings
EN
SurroundMonitor 11900 Series
• Program Meter
(ONLY available when
5.1
or
2 channel Stereo
is selec-
ted in the
Mode
combo box, see above)
By default, the bargraphs in Window 2 show the Peak
Program Meters (
PPM ). However, there are also options
to show a combination of PPM and loudness bargraphs
(the loudness section of this display mode conforming to
various standards and recommendations selected here). In
such loudness modes, various layout options for the PPM
and loudness bargraphs are available.
The available options of the
Program Meter
are:
• PPM
• ITU BS.1771
• EBU R128
• ATSC A/85
• ARIB
• Custom
NOTE - After one of the loudness modes ITU
BS.1771, EBU R128, ATSC A/85, or ARIB was selec-
ted, most of the loudness parameters will be fixed to the
values proposed in the corresponding standard. However,
after the Custom mode was selected, all loudness para-
meters are available for individual editing.
NOTE - The Program Meter option is only availa-
ble if one of the following channel modes was selected in
the
Mode
combo box (see above):
• 2 Channel Stereo: L, R
or
• 5.1: L, R, C, LFE, LS, RS
Furtheron, selecting an option other than
PPM
in the
Program Meter combo box will automatically switch the
Source
selection in the
Metering Routing
section of this
menu page to the digital source
digital
(see correspon-
ding chapter below).
NOTE -
Selecting one of the loudness options in
the
Program Meter
combo box switches the
Peakmeter
Settings button in the Metering Routing section of this
menu page to
PPM + loudness Settings
. See
Metering
Routing
chapter below for details.
• Name
By default, the 7 Sub Presets are named
Key 1
to
Key 7
.
However, they can be renamed using an onscreen key-
board by selecting or right-clicking the Name description
field. Up to 6 characters are available.
• Mode
The parameters in this combo box are used to define the
overall internal channel configuration of the unit.
NOTE -
For each Sub Preset (
Key 1
, ...,
Key 7
), an
individual channel mode can be set. In this way, channel
modes can be switched very easy by selecting a new Sub
Preset on the toolbar.
By switching channel modes, the channels to be pro-
cessed in the monitor controller section are defined as
well. For example, after selecting
7.1
, the internal channels
L, LC, C, RC, R, LS, RS and LFE are selected.
The available options and channel configurations are:
• 2 Channel Stereo: L, R
• 3.1: L, C, R, S
• 5.1: L, R, C, LFE, LS, RS
• 6.1: L, R, C, LS, RS, CS, LFE
• 7.1: L, R, LC, C, RC, LS, RS, LFE
• Multi Channel : independent channels or channel
groups
Use the appropriate
Stereo
or
Surround
mode to reflect
the channel configuration of the input signal to be moni-
tored. The
Multi channel mode is useful for sources with
unrelated channels or channel groups which should be
monitored separately, e. g. Aux sends or SDI groups.
NOTE -
Even after switching to a new channel
mode on one of the seven
Key
menu pages, the settings
for the old mode on this individual key page are „remem-
bered“ by the device. Therefore, as soon as the old mode
is selected again, all parameters will switch back to the
settings defined for that mode earlier.
NOTE -
Depending on this mode setting, the
menu page will change its options. Please refer to the
screenshots earlier in this chapter to see how the page
looks like in each mode.