RTW SurroundMonitor 11900 Series, Руководство пользователя, Страница: 218 / 376

6 | First Use | 6.9 | Adapting the Routing EN-28 SurroundMonitor 11900 Series
7. Select the Sub Preset you want to change with the use of
one of the seven
Key 1
to
Key 7
menu pages.
8. Use the Source combo box to select one of the input
connectors of the unit and the channel combo boxes
below it (e. g. labelled with
l
,
R
,
c
,
LFE
,
lS
,
RS
in 5.1
surround mode) to route each channel of that connector
to the desired instrument channel.
9. Use the
close
button to store the settings and to get
back to the
local Routing Settings
menu page.
10. Use the
Digital Output Routing
button to change the
output routing.
11. Use the Mode combo box to select the channel configu-
ration you want to change.
12. Use the channel combo boxes to route each channel of
the output connectors to the desired instrument channel.
The digital outputs can be used as direct outputs for any
input signals or be configured as outputs for test signals.
13. After you have made the desired changes, use the
close
button of the menu page(s) accessed until the
Save
Preset
menu page appears.
14. Use the
Overwrite Preset
combo box to select one of
the 7 User Presets to be overwritten with the new set-
tings.
15. Use the
change name
button, if you want to change the
name of the selected preset. A menu page with keyboard
buttons is opened.
16. Enter a name with up to 6 characters. Store the name with
the use of the
enter = close
button. The
Save Preset
menu page is shown again.
17. For saving the settings in the user preset selected in
the
Overwrite Preset
combo box and leaving the menu
system press the
Save & Exit
key. The new settings are
stored and the unit returns to normal display operation.
18. For aborting your settings and leaving the menu system
without any changes repeatedly press the
Abort
key until
the unit returns to normal operation mode.